Popular from the catalog!
- Semi-automatic threading
- Machine vertical drilling multispindle
- Planing machine with numerical control
- Semiautomatic rezbofrezerny
- Planing machine with numerical control
- Semiautomatic rezbofrezerny
- Semi-automatic cylindrical grinding
- Semi-automatic gear grinding profile range
- Semiautomatic rezbofrezerny
- Semi-automatic chamfering on the teeth of gears abrasive wheel
- Nominal force, kN: 1000 Status of the slide, mm: 20-150 frequency continuously. / One slide stroke, 1/min: 120/45 distance between the plate and slider, mm: 380
- Nominal force, kN: 1250 Status of the slide, mm: 20-150 frequency continuously. / One slide stroke, 1/min: 120/40 distance between the plate and slider, mm: 440
- Nominal force, kN: 2000 Status of the slide, mm: 20-180 frequency continuously. / One slide stroke, 1/min: 55/23 The distance between the plate and slider, mm: 500
- Nominal force, kN: 3150 Status of the slide, mm: 20-220 frequency continuously. / One slide stroke, 1/min: 40/20 The distance between the plate and slider, mm: 580
- Nominal effort, MN: 34 Diameter blank tubes, mm: 1020-1220 Productivity, leaf / h: 84 Length x width x thickness of workpiece, mm: 12700x1890x17.4
- Force (max), MN: 10 Speed pressing, mm / s: 2-200 Diameter x Length of ingot, mm: 85-180x100-300 Diameter x length compressible product, mm: 20-75x2000-8000
- Force (max), MN: 16 speed compression, mm / s: 0.2-30 Length pressed ingot, mm: 450-800 diameter x length compressible tube, mm: 25-140x3000-20000
- Force (max), MN: 16 speed compression, mm / s: 400 Diameter x length of the ingot, mm: 100-150x400-600 Diameter x length of the pressed product, mm: 75x4000-16000
- Force (max), MN: 16 speed compression, mm / s: 2-80, 2-150 Diameter x Length of ingot, mm: 150-250x300-700 Diameter x length of the pressed product, mm: 14-75x2500-18000
- Force (max), MN: 20 speed compression, mm / s: 400 Diameter x length of the ingot, mm: 140-180x600-700 Diameter x length of the pressed product, mm: 90x4000-16000
|
Gear cutting machines
National Classification of products (abbreviated OKP) - the state standard, included in a single system of classification and coding of technical, economic and social information relevant code products.
Adopted and entered into force on the territory of the Russian Federation, Russian State Standard Resolution dated 30 December 1993 № 301 from 1 July 1994 to replace All-union classification of industrial and agricultural products.
| Photo |
Model |
OKP |
Description |
More |
|
3А666 |
381367 |
Semi-automatic Grinding for gear-cutting heads
Sharpening gear-cutting heads and circular broaches used for bevel gears with circular teeth abrasive wheel with cooling
|
|
|
3Б665 |
381367 |
Semi-automatic Grinding for gear-cutting heads
Sharpening gear-cutting heads, and broaches abrasive wheel with cooling
|
|
|
3В348Ф2 |
381572 |
Gear-hobbing vertical
|
|
|
3В666ВФ2 |
381367 |
Semi-automatic Grinding for gear-cutting heads with computer numerical control
Sharpening gear-cutting heads, and broaches abrasive wheel with cooling
|
|
|
|
3М662ВФ2 |
381367 |
Semi-automatic Grinding for gear-cutting heads
|
|
|
|
3М666ВФ2 |
381367 |
Semi-automatic Grinding for gear-cutting heads
Designed for sharpening gear-cutting heads, and broaches, cut bevel gears with circular and straight teeth, GOST...
|
|
|
5111 |
381571 |
Semiautomatic Vertical Gear
For cutting cylindrical gears with straight and oblique teeth of internal and external links by running blanks...
|
|
|
5121 |
381571 |
Semiautomatic Vertical Gear productional
For cutting cylindrical gears of internal and external links by running blanks cutters for single and serial production
|
|
|
5122 |
381571 |
Semiautomatic Vertical Gear productional
For cutting cylindrical gears of internal and external links by running blanks cutters for single and serial production
|
|
|
|
5122Б |
381571 |
Semiautomatic vertical-speed Gear
For cutting cylindrical gears with straight and oblique teeth of internal and external links by running blanks...
|
|
|
|
5122В |
381571 |
Semiautomatic Vertical Gear
For cutting cylindrical gears with straight and oblique teeth of internal and external links by running blanks...
|
|
|
5140 |
381571 |
Semiautomatic Vertical Gear
For cutting cylindrical gears with straight and oblique teeth of internal and external links by running blanks...
|
|
|
|
5140Б |
381571 |
Semiautomatic Vertical Gear
For cutting cylindrical gears with straight and oblique teeth of internal and external links by running blanks...
|
|
|
5230 |
381521 |
Semi-automatic gear-cutting
For rough and finish cutting the teeth of spur bevel gears. Powered by obkata two twin cutters
|
|
|
|
5236П |
381521 |
Semiautomatic zubostrogalny to spur bevel gears
For cutting fine-grained bevel and hypoid gears with circular teeth by running in single and serial production
|
|
|
АКА0034 |
387841 |
Nominal force, kN: 2500 width x thickness, mm: 150-520x0.5-4 Status of the slide, mm: 50 Diameter of stamped products, mm: 50-500
The complex is designed for automatic hot forging billet products such as rings, bearings, gears, hubs, flanges, bushings, nuts, etc. details. Scope - the metalworking industry.
|
|
|
|
АКА0334.31 |
387841 |
The complex is designed for automatic hot forging billet products such as rings, bearings, gears, hubs, flanges, bushings, nuts, etc. details. Scope - the metalworking industry.
Nominal force, kN: 2500 Diameter stamped, mm: 66 Diameter of workpiece, mm: 20-40 The frequency of moves, 1/min: 70-140
|
|
|
ДА1532 |
382299 |
Presses are designed for cold forward extrusion metalloporoshkov a wide range of smooth-type bushings, gears, bushings with external and (or) the inner collar at the ends or the middle, with holes or no holes along the axis of pressing, flat products of various configurations, etc.
|
|
|
|
ДА1532Б |
382299 |
Presses are designed for cold forward extrusion metalloporoshkov a wide range of smooth-type bushings, gears, bushings with external and (or) the inner collar at the ends or the middle, with holes or no holes along the axis of pressing, flat products of various configurations, etc.
|
|
|
|
ДА1534 |
382299 |
Presses are designed for cold forward extrusion metalloporoshkov a wide range of smooth-type bushings, gears, bushings with external and (or) the inner collar at the ends or the middle, with holes or no holes along the axis of pressing, flat products of various configurations, etc.
|
|
|
|
ДА1534Б |
382299 |
Presses are designed for cold forward extrusion metalloporoshkov a wide range of smooth-type bushings, gears, bushings with external and (or) the inner collar at the ends or the middle, with holes or no holes along the axis of pressing, flat products of various configurations, etc.
|
|
|
|
ДА1536 |
382299 |
Presses are designed for cold forward extrusion metalloporoshkov a wide range of smooth-type bushings, gears, bushings with external and (or) the inner collar at the ends or the middle, with holes or no holes along the axis of pressing, flat products of various configurations, etc.
|
|
|
|
ДА1536Б |
382299 |
Presses are designed for cold forward extrusion metalloporoshkov a wide range of smooth-type bushings, gears, bushings with external and (or) the inner collar at the ends or the middle, with holes or no holes along the axis of pressing, flat products of various configurations, etc.
|
|
|
|
ДА1536Б.01 |
382299 |
Presses are designed for cold forward extrusion metalloporoshkov a wide range of smooth-type bushings, gears, bushings with external and (or) the inner collar at the ends or the middle, with holes or no holes along the axis of pressing, flat products of various configurations, etc.
|
|
|
|
КБ837 |
382195 |
Press is designed for low-waste matrices forming a detachable forging complex shapes such as frogs gears, solid and hollow hub with peripheral elements in the form of ribs, tines, projections, etc
|
|
|
|
КБ839 |
382195 |
Press is designed for low-waste stamping forgings: odnoventsovye gears trucks, tractors, harvesters, machine tools, crosses and fork drive shafts of cars
|
|
|
КИ2124 |
382121 |
Frame - welded. Internal stresses in welds are stabilized by heat treatment.
Table frame has increased the size of the window falling through for stamped parts.
The drive is a two-stage (V-belt and gears) with the location of trees perpendicular to the front press. Gears are placed in a special compartment frame.
|
|
|
|
КИ2126 |
382121 |
Frame - welded. Internal stresses in welds are stabilized by heat treatment.
Table frame has increased the size of the window falling through for stamped parts.
The drive is a two-stage (V-belt and gears) with the location of trees perpendicular to the front press. Gears are placed in a special compartment frame.
|
|
|
|
КИ2128 |
382121 |
Frame - welded. Internal stresses in welds are stabilized by heat treatment.
Table frame has increased the size of the window falling through for stamped parts.
The drive is a two-stage (V-belt and gears) with the location of trees perpendicular to the front press. Gears are placed in a special compartment frame.
|
|
|
|
КИ2129 |
382122 |
Frame - welded. Internal stresses in welds are stabilized by heat treatment.
Table frame has increased the size of the window falling through for stamped parts.
The drive is a two-stage (V-belt and gears) with the location of trees perpendicular to the front press. Gears are placed in a special compartment frame.
|
|
Note: Models, types of CNC machine tools in Russian.
|
