Rollers

National Classification of products (abbreviated OKP) - the state standard, included in a single system of classification and coding of technical, economic and social information relevant code products.
Adopted and entered into force on the territory of the Russian Federation, Russian State Standard Resolution dated 30 December 1993 № 301 from 1 July 1994 to replace All-union classification of industrial and agricultural products.

Photo	Model	OKP	Description	More
	3М667Ф2	381367	Grinding for a Semiautomatic face mills, with the controller SIEMENS Semi-automatic machine designed for grinding face mills with a diameter of 80 ... 630 mm with the cutting of hard...
	ВЗ-324Ф2	381367	Grinding for a Semiautomatic hobs, controller SIEMENS grinding coarse-grained single and multistart hobs of different tool materials.
	ВЗ-410Ф2	381367	Grinding for a Semiautomatic hobs, controller SIEMENS Semi-automatic modes. VZ-410F2 is designed for grinding single and multistart hobs, including closed-flutes, and...
	ВШ-818	381832	Machine for grinding the side surfaces of tapered rollers to pass
	ВШ-880	381832	Machine for grinding the spherical ends of conical rollers for the passage
	ВШ-980	381832	Machine for grinding the spherical ends of conical rollers for the passage
	ЖА-802	381879	Semiautomatic profilenakatnoy double roller
	КЖ-2624.Ф1	381815	Lathe for grinding roller tube mills
	МЕ434	381839	Machine for grinding spheres at the end of the conical roller
	ХШ3-01	381311	Semi-automatic cylindrical grinding cams for distributing rollers Semi-automatic machine designed for grinding cam profile switching cylinders in series and mass production.
	А0937	382491	Nominal force, kN: 5000 Diameter of workpiece, mm: 30 Diameter x Height stamped parts, mm: 32x24 Frequency slide stroke, 1 min: 40-80 The machine is designed for production of billets nuts with threaded holes, bushings, rollers, parts of the calibrated collar, heat-treated steel bars or coils with a phosphate coating, and from the piece blanks.
	А0939	382491	Diameter x height stamped parts, mm: 41x25 diameter of workpiece, mm: 37 Nominal force, kN: 8000 slide stroke rate, 1/min: 40-75 The machine is designed for production of billets nuts with threaded holes, bushings, rollers, parts of the calibrated collar, heat-treated steel bars or coils with a phosphate coating.
	А3718А	382492	Intended for manufacturing of cold forging billet rollers of a calibrated wire in a single stroke machine
	А3720А	382492	Designed for cold stamping blanks rollers calibrated round steel
	А3723А	382492	Designed for cold stamping blanks rollers mm calibrated round steel grades ShKh15 GOST 801-60
	АБ148	382492	Designed for cold stamping blanks rollers calibrated round steel in coils or bars
	АБ148А	382492	Designed for cold stamping blanks rollers calibrated round steel in coils or bars
	АВ6232А-02	382463	Intended for the manufacture of parts of a tape or strips by cold pressing in mass production Feed belt roller
	АВ6234-01	382463	Intended for the manufacture of parts of a tape or strips by cold pressing in mass production Feed roller
	АВ6234-02	382463	Intended for the manufacture of parts of a tape or strips by cold pressing in mass production Feed roller
	АКДА 4938А	387821	Nominal force, kN: 6300 Length x width x thickness be coated. shields, mm: three hundred and fifty-2000x220-870x10-50 Dimensions heating plate, mm: 3300x1800 Specific pressure hot pressing: MPa: 1.0 The line includes: the press force of 6300 kN., Brushing machine, kleevaltsy, conveyor stacker, arch, receiving roller, feeder, conveyor forming.
	АКИ5526А.01	382891	Complex automated for editing and polishing rods based on double roller machine
	АКИ5529А.01	382891	Complex automated for editing and polishing rods based on double roller machine
	АККД2126Е-14	387811	Complexes are proposed based on SINGLE presses a simple action force from 40 to 320 ton. With a roller and the tick feeds, as well as with other means of mechanization. Press KD2126E, reel RU-160A, roll feed the EP-39A, Scissors HM-160
	АККЕ2130А-02	387811	Complexes are proposed based on SINGLE single action presses, with the roller and the tick feeds, as well as with other means of mechanization. Specifications and completeness of the automated systems are defined in the contract On the basis of the press - KE2130A,

Note: Models, types of CNC machine tools in Russian.